WoltLab Suite uses a unified interface to work with database rows using an object based approach instead of using native arrays holding arbitrary data. Each database table is mapped to a model class that is designed to hold a single record from that table and expose methods to work with the stored data, for example providing assistance when working with normalized datasets.
Developers are required to provide the proper DatabaseObject implementations themselves, they're not automatically generated, all though the actual code that needs to be written is rather small. The following examples assume the fictional database table
exampleID as the auto-incrementing primary key and the column
bar to store some text.
The basic model derives from
wcf\data\DatabaseObject and provides a convenient constructor to fetch a single row or construct an instance using pre-loaded rows.
1 2 3 4 5
The class is intended to be empty by default and there only needs to be code if you want to add additional logic to your model. Both the class name and primary key are determined by
DatabaseObject using the namespace and class name of the derived class. The example above uses the namespace
wcf\… which is used as table prefix and the class name
Example is converted into
exampleID, resulting in the database table name
wcfN_example with the primary key
You can prevent this automatic guessing by setting the class properties
If you already have a
DatabaseObject class and would like to extend it with additional data or methods, for example by providing a class
ViewableExample which features view-related changes without polluting the original object, you can use
DatabaseObjectDecorator which a default implementation of a decorator for database objects.
It is mandatory to set the static
$baseClass property to the name of the decorated class.
Like for any decorator, you can directly access the decorated object's properties and methods for a decorated object by accessing the property or calling the method on the decorated object.
You can access the decorated objects directly via
This is the low-level interface to manipulate data rows, it is recommended to use
Adding, editing and deleting models is done using the
DatabaseObjectEditor class that decorates a
DatabaseObject and uses its data to perform the actions.
1 2 3 4 5 6 7
The editor class requires you to provide the fully qualified name of the model, that is the class name including the complete namespace. Database table name and index key will be pulled directly from the model.
Create a new row#
Inserting a new row into the database table is provided through
DatabaseObjectEditor::create() which yields a
DatabaseObject instance after creation.
1 2 3 4 5 6 7
Updating an existing row#
The internal state of the decorated
DatabaseObject is not altered at any point, the values will still be the same after editing or deleting the represented row. If you need an object with the latest data, you'll have to discard the current object and refetch the data from database.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Deleting a row#
Similar to the update process, the decorated
DatabaseObject is not altered and will then point to an inexistent row.
1 2 3 4
Every row is represented as a single instance of the model, but the instance creation deals with single rows only. Retrieving larger sets of rows would be quite inefficient due to the large amount of queries that will be dispatched. This is solved with the
DatabaseObjectList object that exposes an interface to query the database table using arbitrary conditions for data selection. All rows will be fetched using a single query and the resulting rows are automatically loaded into separate models.
1 2 3 4 5 6 7
The following code listing illustrates loading a large set of examples and iterating over the list to retrieve the objects.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
DatabaseObjectList implements both SeekableIterator and Countable.
DatabaseObjectList objects has the following three public properties that are useful when fetching data with lists:
$sqlLimitdetermines how many rows are fetched. If its value is
0(which is the default value), all results are fetched. So be careful when dealing with large tables and you only want a limited number of rows: Set
$sqlLimitto a value larger than zero!
$sqlOffset: Paginated pages like a thread list use this feature a lot, it allows you to skip a given number of results. Imagine you want to display 20 threads per page but there are a total of 60 threads available. In this case you would specify
$sqlLimit = 20and
$sqlOffset = 20which will skip the first 20 threads, effectively displaying thread 21 to 40.
$sqlOrderBydetermines by which column(s) the rows are sorted in which order. Using our example in
$sqlOffsetyou might want to display the 20 most recent threads on page 1, thus you should specify the order field and its direction, e.g.
$sqlOrderBy = 'thread.lastPostTime DESC'which returns the most recent thread first.
For more advanced usage, there two additional fields that deal with the type of objects returned.
First, let's go into a bit more detail what setting the
$className property actually does:
- It is the type of database object in which the rows are wrapped.
- It determines which database table is actually queried and which index is used (see the
Sometimes you might use the database table of some database object but wrap the rows in another database object.
This can be achieved by setting the
$objectClassName property to the desired class name.
In other cases, you might want to wrap the created objects in a database object decorator which can be done by setting the
$decoratorClassName property to the desired class name:
1 2 3
Of course, you do not have to set the property after creating the list object, you can also set it by creating a dedicated class:
1 2 3 4 5 6
Row creation and manipulation can be performed using the aforementioned
DatabaseObjectEditor class, but this approach has two major issues:
- Row creation, update and deletion takes place silently without notifying any other components.
- Data is passed to the database adapter without any further processing.
AbstractDatabaseObjectAction solves both problems by wrapping around the editor class and thus provide an additional layer between the action that should be taken and the actual process. The first problem is solved by a fixed set of events being fired, the second issue is addressed by having a single entry point for all data editing.
1 2 3 4 5 6 7
Executing an Action#
AbstractDatabaseObjectAction::validateAction() is internally used for AJAX method invocation and must not be called programmatically.
The next example represents the same functionality as seen for
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
You can access the return values both by storing the return value of
executeAction() or by retrieving it via
Custom Method with AJAX Support#
The AJAX interface of database object actions is considered soft-deprecated in WoltLab Suite 6.0. Instead a dedicated PSR-15 controller should be used. Please refer to the migration guide.
This section is about adding the method
ExampleAction and calling it via AJAX.
Methods of an action cannot be called via AJAX, unless they have a validation method. This means that
ExampleAction must define both a
public function baz() and
public function validateBaz(), the name for the validation method is constructed by upper-casing the first character of the method name and prepending
The lack of the companion
validate* method will cause the AJAX proxy to deny the request instantaneously. Do not add a validation method if you don't want it to be callable via AJAX ever!
create, update and delete#
delete are available for all classes deriving from
AbstractDatabaseObjectAction and directly pass the input data to the
DatabaseObjectEditor. These methods deny access to them via AJAX by default, unless you explicitly enable access. Depending on your case, there are two different strategies to enable AJAX access to them.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Allow Invokation by Guests#
Invoking methods is restricted to logged-in users by default and the only way to override this behavior is to alter the property
$allowGuestAccess. It is a simple string array that is expected to hold all methods that should be accessible by users, excluding their companion validation methods.
ACP Access Only#
Method access is usually limited by permissions, but sometimes there might be the need for some added security to avoid mistakes. The
$requireACP property works similar to
$allowGuestAccess, but enforces the request to originate from the ACP together with a valid ACP session, ensuring that only users able to access the ACP can actually invoke these methods.